Specifications for Intel's next-generation mobile CPU, Nova Lake-H, have surfaced through product information for the ASR-A505, a robot-control board from Taiwan's Advantech. The Advantech product page lists support for Core Ultra Series 4 (Nova Lake-H), a 25W TDP, and up to 128GB of DDR5-8000 memory. In addition, according to preliminary materials reported by VideoCardz, the CPU has a 16-core configuration with a maximum clock speed of 4.8GHz. Current Panther Lake also has 16-core, 25W-class products, but Nova Lake-H may offer a larger share of high-performance P-cores and faster replaceable memory.
Core Ultra Series 4 appears on an industrial robot board
The ASR-A505 is a 4-inch single-board computer designed for controlling industrial robots. Advantech's product information explicitly names the processor as "Intel Core Ultra Series 4 (Nova Lake-H)." The memory is dual-channel DDR5-8000 (8000 MT/s), and up to 128GB can be installed using replaceable CSODIMM modules.
The board has four LAN ports, CAN-FD, GPIO, and more, and is intended to connect sensors such as cameras, LiDAR, and IMUs (inertial measurement units). GMSL is also available as an option, and the design looks toward robots and industrial equipment that combine multiple sensors.
The preliminary Advantech materials published by VideoCardz reportedly list a 16-core configuration including 8 P-cores, and a maximum clock speed of 4.8GHz. However, what can be confirmed on Advantech's product page is the supported CPU series name and the board's basic specifications; the detailed CPU configuration comes from the preliminary materials that outlet presented.
Meanwhile, the name Nova Lake also appears in Intel's developer instruction set reference. Table 1-1 of that document lists the identifier for mobile as "12_03H" and for desktop as "12_01H." Intel's official documentation thus confirms a mobile Nova Lake family, and the Advantech information points to a concrete product configuration within it.
Still 16 cores, but P-cores rise from 4 to 8
According to the preliminary materials, Nova Lake-H uses a 16-core configuration made up of 8 P-cores, 4 E-cores, and 4 low-power E-cores.
The current Panther Lake chips Core Ultra 7 356H and Core Ultra X7 358H both use a 16-core configuration of 4 P-cores, 8 E-cores, and 4 low-power E-cores. If the new information is correct, Nova Lake-H would keep the total core count unchanged while adding 4 P-cores and removing 4 regular E-cores.
Comparing the preliminary specs presented by VideoCardz with Intel's official specifications for the Core Ultra 7 356H and Core Ultra X7 358H gives the following:
| Item | Nova Lake-H (preliminary) | Core Ultra 7 356H | Core Ultra X7 358H |
|---|---|---|---|
| Source status | Preliminary materials / reports | Official Intel specs | Official Intel specs |
| CPU cores | 16 | 16 | 16 |
| Core configuration | 8P + 4E + 4 low-power E | 4P + 8E + 4 low-power E | 4P + 8E + 4 low-power E |
| Max clock speed | 4.8GHz | 4.7GHz | 4.8GHz |
| P-core base frequency | 2.0GHz | 1.9GHz | 1.9GHz |
| Cache | 18MB | 18MB | 18MB |
| Power | TDP 25W | Base 25W / Max turbo 80W | Base 25W / Max turbo 80W |
| Memory | DDR5-8000 | DDR5-7200 / LPDDR5X-8533 | LPDDR5X-9600 |
| Max memory capacity | 128GB | 128GB | 96GB |
P-cores emphasize high processing performance, while E-cores are designed for power efficiency. A larger share of P-cores could improve performance when running several heavy workloads in parallel. However, actual performance also depends on the design of the new CPU cores, clock speeds, and power limits, so a comparison cannot rest on core counts alone.
On a robot-control board like the ASR-A505 in particular, the system is expected to process data from multiple sensors while running control tasks at the same time. How well it sustains performance under such loads over long periods will matter.
25W TDP with up to 4.8GHz, but real power draw is unconfirmed
The ASR-A505 product information says "TDP 25W," but this does not mean Nova Lake-H's maximum power consumption is capped at 25W.
The current Core Ultra 7 356H and Core Ultra X7 358H both have a processor base power of 25W and a maximum turbo power of 80W. Intel publishes base power and maximum turbo power as separate specifications, so both will need to be confirmed in the official product specifications for Nova Lake-H.
The 4.8GHz maximum in the preliminary materials also does not indicate a frequency that all CPU cores can sustain for long periods. For Intel's current products, maximum turbo frequency is defined as the highest single-core frequency reachable through Turbo Boost. Clock speeds when multiple cores are in use vary with conditions such as power consumption, temperature, and cooling capacity.
Intel's design guide for Core Ultra Series 3 also shows design examples of 25W base / 64W max turbo and 45W base / 80W max turbo. These relate to board-side design conditions and must be distinguished from the power specifications set for individual CPU products.
The information needed to compare integrated GPUs is also not yet available. Panther Lake's Core Ultra 7 356H has Intel Graphics with 4 Xe cores and a maximum GPU clock of 2.45GHz. The Core Ultra X7 358H has Intel Arc B390 with 12 Xe cores and runs at up to 2.5GHz.
The preliminary materials for Nova Lake-H reportedly list a maximum Intel Arc Graphics clock of 2.3GHz. However, details such as the GPU core count have not been disclosed, so the performance gap with current products cannot yet be judged.
The official model number of the CPU that will carry Nova Lake-H, its release timing, and its maximum turbo power have also not been announced. All-core clock speeds under load and the integrated GPU configuration are items to check in the official specifications to come.
Replaceable DDR5-8000 support, with 128GB/s theoretical bandwidth
Another feature of the ASR-A505 is its support for replaceable DDR5-8000 memory.
The CSODIMM it uses is a compact memory module with a clock driver, and its structure allows memory to be replaced or expanded. According to Kingston's technical explanation, the clock driver re-drives the clock signal and suppresses effects such as jitter, securing the signal quality needed for high-speed memory operation.
The DDR5-8000 advertised for the ASR-A505 aims for a transfer rate of 8000 MT/s using replaceable memory. Compared with the DDR5-7200 supported by the current Core Ultra 7 356H, the nominal transfer rate is about 11.1% higher.
Theoretical memory bandwidth can be calculated from the transfer rate and data width. Assuming a data width of 64 bits per DDR5 channel, dual-channel gives a total of 128 bits, or 16 bytes. Based on the data width given in Micron's memory module reference, the theoretical bandwidth of DDR5-8000 is calculated as follows:
With DDR5-7200 in the same dual-channel configuration, the theoretical bandwidth is 115.2 GB/s.
DDR5-8000 therefore offers about 11.1% more theoretical bandwidth than DDR5-7200. This is a comparison between DDR5 configurations with the same data width, and the memory implementation conditions differ from the LPDDR5X-8533 supported by the Core Ultra 7 356H or the LPDDR5X-9600 supported by the Core Ultra X7 358H.
The ASR-A505 also advertises a maximum memory capacity of 128GB, but it is unclear whether DDR5-8000 transfer speeds can be maintained at that capacity. In general, memory operating speed is constrained by module capacity, module count, rank configuration, motherboard design, BIOS settings, and more. Intel's design guide likewise ties maximum memory speed to board and DIMM configuration.
In robot control and industrial applications, it is important to run multiple sensor-processing and compute-heavy tasks stably while carrying large amounts of memory. For Nova Lake-H, attention will turn to how much DDR5-8000 support, along with the increase in P-cores, contributes to real-world performance. Once the official CPU specifications and supported memory configurations are known, concrete performance comparisons with existing Panther Lake systems will become possible.
