On November 18, 2026, the European Commission proposed "Advanced Materials for Europe," a policy aiming to make the EU the world leader in advanced materials research, development, production and use by 2035. Unlike the originally planned Advanced Materials Act, it was submitted as a draft Council recommendation that imposes no legal obligations on member states. It sets three targets, including a 20% increase in research and innovation investment, but the press release does not state the baseline amount for the investment target. According to the Commission's supporting documents, EU research and innovation investment in advanced materials was €61.5 billion in 2023, about 28% of the US figure of €218.8 billion. Raising that amount by 20% would give €73.8 billion, still only about 34% of the US 2023 level. However, the documents do not make clear whether the €61.5 billion covers the same scope as the recommendation's investment target.
From an Advanced Materials Act to a Non-Binding Recommendation
On October 21, 2025, the Commission opened a call for evidence on an Advanced Materials Act. At the time, it said it would gather input on designing a legal framework to support the adoption of advanced materials, with a legislative proposal planned for 2026. What was actually submitted, however, is a draft Council recommendation (COM(2026) 833).
A Council recommendation is based on Article 292 of the Treaty on the Functioning of the European Union and is not legally binding on member states. The proposal itself states that it imposes no legal obligations on member states or private companies and creates no new certification or reporting requirements. The Commission initially considered a binding regulation as well, but concluded that its added benefits would not justify the administrative burden and regulatory complexity, compared with an approach centered on coordination among member states. Specific measures will be decided by member states according to their own circumstances, and progress will be monitored using key performance indicators (KPIs) by a Technology Council for Advanced Materials made up of representatives from member states, industry and academia.
The draft recommendation sets three targets to be achieved by 2035, using 2023 as the baseline.
- At least a 20% increase in research and innovation investment: Research and innovation investment in advanced materials and related manufacturing technologies by the EU, member states and regions is to rise by at least 20%.
- At least a 20% increase in startups and scaleups: The number of advanced materials startups and scaleups based in the EU is to grow by at least 20%.
- Faster commercialization of research results: At least 20% of EU- and member state-funded research and innovation projects on safer and more sustainable advanced materials that reach technology readiness levels (TRL) 7–8 are to be moved on to practical deployment.
Member states are asked to aim for full implementation by December 31, 2030. The Technology Council for Advanced Materials is to carry out a midterm review by December 31, 2028, and compile an implementation report by December 31, 2030. Adoption of the recommendation requires approval by the Council of the EU.
A 20% Increase Still Leaves a Large Gap with the US
Converted into actual amounts, the investment target reveals a large gap with the United States. According to the Commission Staff Working Document attached to the proposal, research and innovation investment in advanced materials in 2023 was €61.5 billion in the EU and €218.8 billion in the US. The EU's investment equals about 28% of the US figure.
Increasing the EU's €61.5 billion by 20% gives €73.8 billion, an increase of €12.3 billion. That is still only about 34% of the US 2023 level, leaving a gap of €145 billion. Raising investment by 20% over the 12 years from 2023 to 2035 would also correspond to a compound annual growth rate of about 1.5%.
The supporting documents, however, leave the scope of the investment figures unclear. Elsewhere, they compare industry investment in 2020, at €19.8 billion for the EU and €50.3 billion for the US, but it is not stated whether the 2023 figure of €61.5 billion covers only industry investment or a total including public funding. Nor is it clear whether it matches the scope of EU, member state and regional investment covered by the recommendation. The €73.8 billion is therefore a reference value calculated from the €61.5 billion, not an official investment target set by the Commission. The US figure is also from 2023 and is not a forecast of how the gap will change by 2035.
The difference in scale also shows up in funding for startups. The supporting documents say that 731 of the 3,177 advanced materials startups worldwide (about 23%) are based in the EU. This is based on Dealroom data counting companies less than ten years old, and US startups have raised 2.5 times as much funding as those in the EU. While the EU has a certain number of companies, it lags well behind the US in the scale of funding.
There are also regional differences in how many products use advanced materials. According to a survey cited by the Commission, the share of products incorporating advanced materials was 50% in the US, about 40% in Japan, South Korea and the UK, and about 30% in the EU. Because the recommendation does not directly impose obligations on private companies, it does not immediately change the conditions for Japanese companies entering the EU market. However, if member states later introduce measures related to public procurement or testing and certification systems, the business environment could vary from country to country.
Budget and the 2028 Midterm Review Will Determine Effectiveness
The lack of legal force alone does not determine how effective the recommendation will be. Member states are to jointly draw up implementation plans and a roadmap, and the Technology Council for Advanced Materials will monitor progress through KPIs. The Commission also explains that it chose a non-binding approach in order to pursue flexible measures tailored to each country in a fast-moving field of technology. The 20% increase in investment is only a minimum target, and closing the investment gap with the US is not itself the aim of the recommendation.
On the other hand, no specific budget to back the investment target has been presented. The proposal says that contributions from Horizon Europe and the European Competitiveness Fund under the next multiannual financial framework for 2028–2034 cannot be prejudged at this stage. Additional work on the Commission's side is to be handled with existing internal resources. The EU has committed €2.3 billion to advanced materials through Horizon Europe in 2021–2027, but neither the proposal nor the press release specifies any new funding beyond that.
In assessing the investment target, a key question is first whether the Commission will clarify the baseline and scope for the 20% increase. If the baseline investment amount is larger than €61.5 billion, the additional amount implied by a 20% increase would also change. The midterm review due by December 31, 2028 will then show whether national investment is on track toward the target of a 20% increase over 2023. In addition, if funding for advanced materials is secured under Horizon Europe and the European Competitiveness Fund in negotiations on the next EU budget, the recommendation's targets could be tied to concrete investment plans.
