Finland's ICEYE announced Gen5, its fifth-generation synthetic aperture radar (SAR) satellite, on November 16, 2026. The company says it delivers ground resolution of up to 11 cm for government customers using 1,800 MHz of imaging bandwidth, and up to 16 cm for all customers using 1,200 MHz. Using the 11 cm resolution requires compliance with International Telecommunication Union (ITU) regulations. In an article published the same day, Robert Wall of Aviation Week described the previous-generation Gen4, deployed from 2025, as a 16 cm-resolution satellite. Gen5's government configuration therefore allows finer observation of the ground. However, ground resolution varies with viewing angle and imaging area, so it is important to understand the conditions under which the 11 cm figure applies.
Imaging conditions behind the 11 cm ground resolution
Gen5's official specifications list ground resolution of 17 cm at a 30-degree incidence angle and 11 cm at 50 degrees. The incidence angle is the angle between the direction perpendicular to the ground surface and the direction of the radar beam transmitted from the satellite. Imaging bandwidth, meanwhile, refers to the width of the frequency range used by the radar signal. Even with the same satellite, the fineness of the detail that can be distinguished on the ground changes with bandwidth and viewing angle.
Organizing ICEYE's official announcement and the product specifications shows the difference between the highest resolution offered to each customer group and the resolution that varies with viewing angle. The government figure of 11 cm is the maximum value, conditional on 1,800 MHz of bandwidth and ITU compliance; the official specifications give 17 cm at a 30-degree incidence angle and 11 cm at 50 degrees. In addition, wide-area imaging of up to 120,000 km² and fine imaging of a 5×5 km area are offered as separate modes.
| Source and target | Imaging bandwidth | Incidence angle | Ground resolution | Coverage area | Conditions |
|---|---|---|---|---|---|
| Government configuration in announcement | 1,800 MHz | Not stated | Up to 11 cm | Not stated | ITU compliance |
| All-customer configuration in announcement | 1,200 MHz | Not stated | Up to 16 cm | Not stated | Available to all customers |
| Gen5 specs by angle | Up to 1,800 MHz | 30° | 17 cm | Not stated | ITU compliance |
| Gen5 specs by angle | Up to 1,800 MHz | 50° | 11 cm | Not stated | ITU compliance |
| Wide-area imaging on product page | Not stated | Not stated | Not stated | Up to 120,000 km² | Separate mode from fine imaging |
| Fine imaging on product page | Not stated | Not stated | Up to 11 cm | 5×5 km | ITU compliance |
Note: Based on materials released by ICEYE on November 16, 2026. Each figure reflects the conditions stated in the materials as written; no conversion has been made between different conditions.
Because the announcement does not state an incidence angle for the 16 cm all-customer figure, it cannot be compared under the same conditions as the government's angle-specific specifications. Also, the mode used differs depending on whether a wide area is observed at once or a narrow area is imaged in fine detail. A coverage area of up to 120,000 km² and 11 cm ground resolution cannot be obtained at the same time.
Ground resolution changes with incidence angle because the radar projects distances measured along a slanted line onto the ground. SAR transmits pulses whose frequency varies and compresses the range signal by matching the reflected waves against the known transmitted waveform. Here, bandwidth determines how finely distances can be distinguished along the radar's line of sight. When that distance is projected onto the ground, a smaller incidence angle gives a longer ground distance and therefore a larger resolution value.
Table 2 in ICEYE's technical explanation gives an example in which, with line-of-sight resolution fixed at 0.50 m, ground resolution is 1.00 m at a 30-degree incidence angle and 0.55 m at 60 degrees. This is a numerical example to illustrate the relationship between viewing angle and ground resolution, not a Gen5 test result.
The trade-off between coverage area and resolution
In the Standard Image Product Specification version 6.0.8 published by ICEYE, the minimum performance of each image product is the baseline, and the nominal condition for the high-resolution mode is a 30-degree incidence angle. The document covers satellites up to Gen4, but it is useful for distinguishing between a satellite's maximum performance and the specifications of the image products customers actually order and receive. For Gen5 as well, which imaging mode and incidence angle can deliver 11 cm resolution will shape real purchasing decisions.
SAR is a technique that synthesizes reflected waves received while the satellite moves in order to produce a high-resolution image. The mechanisms that determine resolution differ between the along-track direction, in which the satellite travels, and the range direction along the radar's line of sight. Illuminating a given spot for a long time can improve along-track resolution, but when a wide area is scanned, the illumination time at each point becomes shorter. Averaging multiple observations can also suppress the speckle noise characteristic of SAR images. The balance among coverage area, resolution, and noise has to be adjusted to the observation purpose. Note that the ground resolution listed in the standard product specification is measured at the center of an amplitude image projected onto the ground surface.
On operational performance, ICEYE emphasizes the flexibility to image closely spaced targets and an increase in imaging capacity per orbit. Gen5 operates at altitudes of 450 to 600 km and can capture 18 or more images in a single acquisition. Data transmission to the ground using a directional antenna reaches up to 1 Gbps. However, delivering captured images to users requires downlinking and data processing, so what matters is not only imaging capability but also the performance of the whole chain from acquisition to delivery.
ICEYE further explains that precise orbit control makes it possible to observe the same location from the same angle every day. Aligning observation conditions makes it easier to overlay images from different dates and detect changes on the ground. For uses such as continuously monitoring the progress of a disaster or changes at a facility, the ability to observe repeatedly under the same conditions is valuable in addition to the resolution of a single image.
Onboard AI aims to shorten the time from imaging to decision
Gen5 will also carry an AI processor. However, what ICEYE announced this time is hardware to support future capability expansion, along with a plan to deliver software in stages. The company intends to add, in sequence, functions such as onboard data selection and preprocessing, as well as instructing the next imaging task based on detection results. These functions are scheduled to be delivered through software updates to satellites in orbit, so the installation of the AI processor and the start of operation of each function need to be distinguished.
According to ICEYE Japan's official announcement, Gen5 uses the same software and ground systems as previous generations. Existing customers can therefore carry over their current imaging request procedures. For new customers, the company says it will make a system including ground systems, software, and training operational within 12 months of contract signing. To put the satellite's imaging performance to practical use, ground-side mechanisms that handle everything from imaging requests to data reception and image processing are also required.
Co-founder and CEO Rafal Modrzewski cited vessel tracking and flood response as examples and said, "In space-based intelligence, time to decision is everything." The company aims to shorten the time from observation to decision by combining high-resolution image acquisition, expanded imaging capacity, and onboard AI processing. If a satellite can select and process the data it needs in orbit, it may be able to narrow down the information sent to the ground and speed up response.
The performance figures released are based on ICEYE's product specifications, and details such as independent test procedures, the number of units tested, and measurement error have not been disclosed. The specific launch date of the first Gen5 satellite, the actual time from imaging to image delivery, and the timing of each AI function's availability have also not been made clear. Beyond the specific conditions for using 11 cm government imagery, how far the time from imaging through delivery and analysis is actually shortened in real operations will be key to evaluating Gen5's performance.
