Satellite communications company Iridium announced on November 17, 2026 (U.S. time) that it has activated "Iridium NTN Direct," a service that connects IoT devices directly to satellites, even where terrestrial cellular networks don't reach. Using its existing low-Earth-orbit constellation, the company is adding satellite connectivity for uses such as collecting data from remotely installed measuring instruments and tracking assets. The first certified communications module is Nordic Semiconductor's nRF9151, and compatible firmware is scheduled for release in January 2027. When devices already in the field can actually use satellite connectivity will depend on firmware availability as well as service conditions in each region.
66 low-Earth-orbit satellites cover areas beyond terrestrial cellular networks
According to Iridium's service documentation, Iridium NTN Direct uses 66 operational low-Earth-orbit satellites and internationally coordinated L-band spectrum. The company says this constellation can provide geographic coverage around the world, including oceans, deserts, and the Arctic and Antarctic. It also claims the service is the world's first globally covering satellite service built to 3GPP standards.
The service uses NB-IoT, a narrowband communication method that lets IoT devices such as sensors send and receive small amounts of data. Where terrestrial cellular networks are unavailable, compatible devices can switch to D2D (Direct-to-Device) mode, communicating with a satellite directly rather than through a ground base station. The intended uses are mainly applications that don't require large data volumes, such as monitoring remote equipment, reading meters and tracking asset locations.
Livestock-management equipment maker Nofence offers a concrete example of combining terrestrial and satellite networks. The company's chief technology officer said Iridium NTN Direct is being built into its "N3" livestock collar, which already supports terrestrial NB-IoT. The aim is to keep track of animals' locations even when they move to pastures where cellular signals are weak.
nRF9151 gets first certification; compatible firmware due January 2027
The first communications module Iridium has certified for the service is Nordic Semiconductor's nRF9151 SiP. In addition to terrestrial LTE-M and NB-IoT, it supports NB-NTN (Narrowband Non-Terrestrial Network) for satellite communications. The nRF9151 product specifications also state support for Band 249 (1616–1626.5 MHz, TDD), which includes the L-band used by Iridium. According to Iridium, this module was also used when the first message was sent over actual satellites on the service.
The 3GPP release numbers cited differ between the product and the service. "Release 17" in the nRF9151 specifications indicates that the modem implements satellite narrowband IoT communication using Cat-NB1/NB2. "Release 19," which Iridium cites in its service documentation, describes the service's positioning within 3GPP's non-terrestrial network (NTN) standards. To judge when existing devices will be able to connect to Iridium NTN Direct, it is necessary to check when compatible firmware will be available, not just the release numbers.
Nordic Semiconductor plans to release firmware compatible with Iridium NTN Direct in January 2027. Iridium expects that devices with the nRF9151 that have already been deployed can gain satellite connectivity through a firmware update, without replacing hardware.
Other chipmakers are also moving to support the service. Mlink is conducting communication tests over actual satellites using its "MS150-IR" for the service. Altair is building support into its "ALT1350" and next-generation "ALT1550." Cooperation with carriers is also progressing, and Iridium names Deutsche Telekom IoT and Vodafone IoT as partners.
Satellite coverage and where the service can actually be used are different
Although Iridium NTN Direct covers locations around the world with its satellite network, it won't be immediately available in every country and region. Iridium says that providing and using the service must comply with the laws and regulations of each country and region, as well as the terms set by service providers. For that reason, anyone considering adoption needs to check three conditions: satellite coverage, device support, and local service availability.
| Item to check | What was announced as of November 2026 |
|---|---|
| Satellite network coverage | Uses 66 low-Earth-orbit satellites and the L-band to provide geographic coverage around the world, including the north and south polar regions. |
| Device support | The first certified module, the nRF9151 SiP, supports Band 249. Compatible firmware for existing devices is scheduled for release in January 2027. |
| Local service use | Subject to the laws and regulations of each country and region and the terms of service providers. Specific service areas and start dates are not uniform. |
For example, if you are considering using the service in Japan, a device having an nRF9151 doesn't by itself mean it can use satellite communications. You would need to separately confirm whether any provider offers the service in the country, when it starts, and what it costs. The November 17 announcement did not specify when the service would be offered in Japan, which providers would handle it, or pricing, and for the compatible firmware only the planned release month, January 2027, has been made known.
Once compatible firmware is available and the service can be contracted and used where a device is installed, existing nRF9151-equipped devices are expected to gain an added communication path for sending meter readings and location data from outside cellular coverage, without being replaced.
