On November 16, 2026, NTT and ispace signed a cooperation agreement to jointly study everything from research and development to demonstration and eventual commercialization of optical communications linking Earth and the Moon, as well as laser power beaming on the lunar surface. With lunar exploration, construction, and resource development expected to expand, the companies aim to build communications and power infrastructure for the Moon. However, the announcement gives no targets for data rates or delivered power, no demonstration schedule, and no investment figures. The two companies will begin by examining intended use cases, system configurations, technical requirements, and demonstration methods.

The two technologies covered by the agreement are at different stages of development. For optical communications, NASA has already demonstrated high-speed data transmission across roughly 380,000 km, the distance between the Moon and Earth. For laser power beaming, NTT and Mitsubishi Heavy Industries have succeeded in transmitting power over 1 km on the ground, and research aimed at applying the technology to the lunar environment has only just begun. NASA's demonstrations did not test NTT's or ispace's technologies, but they offer useful background for understanding the kind of communications infrastructure the agreement is aiming at.

AD

NTT and ispace to cooperate on lunar optical communications and laser power beaming

According to the NTT and ispace announcement, the agreement covers joint study in two main areas. One is optical communications technology linking Earth and the lunar surface. The other is infrastructure technology supporting lunar development, including laser power beaming on the Moon. Both will be examined from technology development through demonstration to commercialization. After specifying use cases, system configurations, technical requirements, and demonstration methods, the companies are also considering verifying the technologies step by step, on the ground and in space.

NTT is promoting IOWN (Innovative Optical and Wireless Network), a next-generation communications infrastructure concept built on optical technology, and positions this agreement as an extension of that effort into the space domain. However, NTT's announcement does not specify which of the technologies that make up IOWN would be used for Earth-Moon communications. It also does not disclose performance targets such as data rate, delivered power, or transmission distance, nor the timing of demonstrations or the investment amount.

As background to the agreement, the companies cite the importance of space traffic management and space situational awareness in cislunar space, the region between Earth and the Moon. Their view is that for Japan's public and private sectors to carry out lunar activities safely, Japan needs a framework in which it can independently secure and operate the necessary communications capabilities. This ties into what the Cabinet Office describes as "cislunar security". Minako Tsumenaga, NTT Executive Officer and head of the Alliance Department in the R&D Marketing Headquarters, issued a comment welcoming the chance to take on the challenge of creating new infrastructure that connects Earth and the Moon with light.

NASA has already demonstrated high-speed laser communications at lunar distance. In October 2013, it achieved two-way optical communications between the Moon and Earth using the Lunar Laser Communication Demonstration (LLCD) aboard the lunar orbiter LADEE. According to results NASA announced on October 22, data was transmitted at 622 Mbps to a ground station about 239,000 miles (roughly 380,000 km) away. In the reverse direction, error-free data transmission at 20 Mbps was also demonstrated from a ground station in New Mexico to the lunar orbiter.

In April 2026, a laser communications system called O2O (Orion Artemis II Optical Communications System), carried aboard the Orion spacecraft, was used during NASA's crewed lunar flyby mission Artemis II. According to NASA's announcement, it was the first laser communications system to support a crewed spacecraft at lunar distance, establishing 260 Mbps downlinks multiple times. Over the roughly 10-day flight, the total data exchanged between Orion and the ground reached 484 GB, and was used to transmit high-definition video and photos, flight procedures, scientific observation data, and voice communications. NASA explains that conventional radio communications were limited to data rates of a few Mbps at lunar distance.

Both the 2013 LLCD and the 2026 O2O showed that high-speed optical communications work at lunar distance. However, LLCD was carried on an uncrewed lunar orbiter while O2O flew on a crewed spacecraft, and their communications terminals, ground stations, and operating conditions differ. The figures of 622 Mbps and 260 Mbps therefore cannot be compared directly as a measure of the two systems' performance.

NTT is also pursuing other work on space optical communications. On November 6, before this agreement, the company announced a collaboration with France's Safran Data Systems. It will consider introducing NTT's digital coherent technology and network control technology into Safran's optical ground stations, targeting a variety of satellites from low Earth orbit to geostationary orbit. That effort aims to build optical communications infrastructure linking satellites and the ground and is separate from the NTT-ispace agreement; it has not been explained that the technologies covered in the Safran collaboration will be used for communications with the Moon.

AD

Laser power beaming succeeded over 1 km on the ground; research on lunar devices has begun

For long-distance power transmission by laser, NTT and Mitsubishi Heavy Industries succeeded in a ground demonstration in 2025. In January and February 2025, on a disused runway at Nanki-Shirahama Airport in Wakayama Prefecture, the two companies directed a laser beam of about 1 kW at a target 1 km away and received an average of 152 W of electricity. The ratio of received power to transmitted power was about 15%. In an announcement on September 17 of that year, they said they had achieved the world's highest efficiency for laser power beaming using silicon photoelectric conversion devices in an environment with strong atmospheric turbulence. The results were published on August 5 in the journal Electronics Letters.

Laser power beaming works by converting electricity into laser light on the transmitting side and converting it back into electricity with a photoelectric conversion device on the receiving side. If the intensity distribution of the laser beam becomes uneven as it travels over a long distance, conversion efficiency at the receiver drops. NTT therefore developed a long-distance flat-beam shaping technology that adjusts the beam so its intensity distribution is uniform at 1 km. Mitsubishi Heavy Industries handled the receiver-side homogenizer and a circuit that levels the output current, suppressing the effects of atmospheric turbulence.

However, this demonstration took place in Earth's atmosphere and was not a power beaming test on the Moon. The photoelectric conversion device used was also made of silicon, and handling the intense light and space radiation expected on the lunar surface will require separate technology development.

Since April 2026, NTT has been conducting joint research with the University of Miyazaki, the National Institute of Information and Communications Technology (NICT), and the Japan Aerospace Exploration Agency (JAXA) on new photoelectric conversion devices for the lunar surface. According to the research plan from JAXA's Space Exploration Innovation Hub, the research period runs through March 2028, and the team will develop InGaAsP (indium gallium arsenide phosphide) semiconductor devices that receive lasers in the 1000 nm band, which is suited to long-distance transmission. The aims include raising tolerance to intense light by stacking multiple photoelectric conversion junctions, improving cosmic-ray resistance by optimizing the device structure, and improving conversion performance when light strikes unevenly.

Behind this research is the need to supply power for work such as drilling for ice thought to exist in permanently shadowed regions of the Moon. If power can be sent by laser from a distant base to places that sunlight does not directly reach, it could extend the range of activity for rovers and drilling equipment. The joint research aims to develop light-receiving devices suited to such long-distance laser power beaming.

Separately, NTT and JAXA are also researching the use of regolith, the lunar soil, as a power transmission path. Under a research plan running from April 2026 to March 2027, they will test a method that uses electric field resonance and electric field surface waves to send power to multiple devices through the regolith. Specifically, the goal is to build a prototype that can simultaneously supply 5 W or more of power to two or more devices over a distance of about 1 m. This method uses electric fields rather than lasers, and it has not been announced whether it is included in the agreement with ispace.

These lunar-oriented joint studies are all targets set at the start of the research, not results already achieved. The 15% power transfer efficiency achieved by NTT and Mitsubishi Heavy Industries on the ground is likewise not a figure measured in the lunar environment.

Lunar optical communications and laser power beaming: how far has development come?

The main research, development, and demonstrations related to this agreement are organized chronologically below.

Date Party Details Stage
October 2013 NASA LLCD demonstrated a 622 Mbps downlink from the lunar orbiter LADEE Demonstrated at lunar distance
January–February 2025 NTT, Mitsubishi Heavy Industries Sent a laser beam of about 1 kW over 1 km on the ground and received an average of 152 W (about 15% efficiency) Demonstrated on the ground
April 2026 NTT, University of Miyazaki, NICT, JAXA Began joint research on photoelectric conversion devices for long-distance laser power beaming on the Moon (through March 2028) Research stage
April 2026 NTT, JAXA Began research on electric field surface wave power transmission using regolith as the transmission path (through March 2027) Research stage
April 2026 NASA O2O on Artemis II established 260 Mbps downlinks multiple times from a crewed spacecraft Demonstrated at lunar distance
November 16, 2026 NTT, ispace Signed cooperation agreement on Earth-to-Moon optical communications and lunar laser power beaming Joint study begins

Note: Data rates and power transfer efficiency were measured on different systems and under different conditions, and cannot be compared directly.

The track record so far shows that optical communications at lunar distance were demonstrated by NASA in 2013 and 2026. For laser power beaming, the only confirmed result is the 1 km ground test by NTT and Mitsubishi Heavy Industries, and research aimed at lunar application has only just started. The agreement aims to combine these two technologies as infrastructure supporting lunar activity.

ispace also has lunar mission plans that could potentially be used for future demonstrations. It is planning "Mission 3," aiming for a lunar landing in 2028, and in March 2026 it announced the commercialization of "Luna Connect Service," a communications service using its own lunar-orbiting satellites. As a first step, it plans to launch its first lunar-orbiting satellite as "Mission 2.5" as early as 2027. However, it has not been decided that demonstrations of optical communications or laser power beaming under the NTT agreement will be carried out on these missions.

ispace CEO Takeshi Hakamada commented on the agreement: "First, we will examine the applicability of optical communications and laser power beaming to the lunar environment and opportunities for demonstration." Whether the two companies go on to set technical targets such as data rate and delivered power, and to present a concrete demonstration plan using ispace's lunar-orbiting satellites or landers, will be a key indicator of how the agreement progresses.